展示全部
响。3.光学相干检测技术由于激光的相干技术测量的尺度通常与激光波长相当,当前被广泛运用于精密测量技术,其中自混合干涉技术(SMI)技术正在被广泛运用于传感器领域。激光自混合干涉效应指的是在激光测量中,激光器发出的光被外部物体反射或散射,部分光反馈会与激光器腔内光相混合,引起激光器的输出功率、频率发生变化,引起输出的功率信号与传统的双光束干涉信号类似,所以被称为SMI。由于反射物的不同位置和相对移动速度会引起不同的SMI干涉频率,利用这种物理现象,如果事先做好标定和校准就可以实现对微小振动和位移的精确测量。您可以通过我们的官方网站了解更多的产品信息,或直接来电咨询4006-888-532。 ...
条件下的平均相干检测结果。上面是COTDR具体结构图,激光器发出的激光经耦合器分成两束,一束经过声光调制器调制为探测光脉冲,再经耦合器注入被测光纤。返回的背向瑞利散射光信号与参考光混合,二者产生中频信号由平衡探测器接收。平衡探测器输出带中频信息的电流信号,最后经放大,模数转换后,由数字信号处理单元得到探测曲线。二、相干探测的特点对于传统OTDR直接功率探测而言,COTDR可以在较低探测光功率下获得更高的动态范围。OTDR使用宽带光源,会占用部分通信信道,COTDR使用单频窄线宽激光,对通信类光纤检测的影响可以降低。基于COTDR的原理,抗ASE噪声的能力也增加,同时采用同性能雪崩光电二极管做平 ...
,我们将光学相干检测光路集成在单个芯片上,并通过一体化封装,将光学芯片、激光器、探测器以及光学镜头集成到一个模组里。这一设计使产品重量、功耗、成本都大幅度下降。为客户提供了低成本、低功耗、高性能、小型化的选择,便于集成的解决方案,也为激光振动传感器的广泛应用奠定了基础。相关文献:[1]刘杰坤,马修水,马勰.激光多普勒测振仪研究综述[J].激光杂志,2014,35(12):1-5.DOI:10.14016/j.cnki.jgzz.2014.12.001.更多详情请联系昊量光电/欢迎直接联系昊量光电关于昊量光电:上海昊量光电设备有限公司是光电产品专业代理商,产品包括各类激光器、光电调制器、光学测量 ...
快光纤通信的相干检测的新发展,需要远低于1MHz的被动激光线宽。一些研究已经介绍了重要的参数和贡献,注意到固有线宽取决于从外部腔的反馈。实验研究了腔长、功率、光栅参数以及外腔模相对于光栅角的失谐效应。从而发现,准直透镜的焦点会影响外腔反馈的效率,从而影响激光器的线宽。镜头焦点的微小或不明显的变化可以对线宽产生相当大的影响,但只有在技术噪声小(与固有腔线宽相当)时才明显。猫眼式反射镜的一个重要优势在于猫眼反射镜本身是自对准的,无论入射角如何,入射光束经过猫眼光学系统后能够按照入射方向原路返回二极管,即使光束没有很好地准直。因此输出激光对机械干扰非常不敏感,也确保了高反馈耦合效率,从而获得窄线宽。 ...
或 投递简历至: hr@auniontech.com