利用相位调制器和1/4波片对线偏光的偏振方向进行旋转,结构大概为:假设一束水平方向的偏振光E=E0·ei(-ωt+φ_0)为方便理解,只考虑强度和相位,并且假定强度值为2。[加入相位调制器]调制器的调制方向与入射光的偏振方向呈45°,f与s方向引入的相位差为调制量φ。此时,f方向Ef=√2*ei(-ωt+φ)s方向Es=√2*e-iωt[加入1/4波片]然后,再加入一片1/4波片,波片的f轴方向与调制器的调制方向呈45°,y轴方向。将Ef和Es分解到x和y轴方向,即1/4波片的s和f方向。Ef分解为Eff和Efs两个分量,Es分解为Esf和Ess两个分量。Eff=ei(-ωt+φ+π/2)Ef ...
常常被忽略。相位调制入射光偏振方向应该与快轴方向一致,根据Pockels效应,相位延迟量与电场也是线性关系ϕ=k×VV是外部电压,k是相位延迟量与电压之间的系数强度调制入射光需要与快轴和慢轴夹角为45°,下面是假设入射光为45度,快轴为90°下图是对应不同相位差的情况下,出射光的偏振状态。初始相位差为0,间隔为π/6。如果在上述光路下,在-45°方向添加一个偏振片,那么则光强为将kV的形式修改一下后,可以得到V_(π/2)就是半波电压。您可以通过我们的官方网站了解更多的产品信息,或直接来电咨询4006-888-532。 ...
。同时对激光相位调制的调制度和调制频率的选取,以得到高信噪比和良好控制灵敏度的鉴频曲线,调制的频率会高于腔模线宽的频率;精密的伺服控制系统以及良好的动态响应的执行系统也是重要因素。图2:精细度与透射情况的关系F-P腔共振的窄线宽意味着需要一个高带宽的伺服控制器来锁定激光到PDH误差信号。通常腔线宽会小于激光器自由运行的线宽,这意味着需要一个非常快的控制环来实现稳定的锁频,对于压窄线宽很有好处。MOGLabs 提供FSC100快速伺服控制器,为快反馈(激光电流)和慢反馈(压电陶瓷)提供单独可配置的控制回路。图3:PDH稳频的简化装置图MOGLabs通过采用美国Stable Laser Syste ...
改变。当一个相位调制器和马赫泽德干涉仪或者调制器相互组合,光束经过干涉仪被分成两路,其中一路中放置了扑克尔效应。当两路光束再次汇聚后相互相长或者相消,以此达到光强调制的效果。电光吸收调制电光吸收的方法时建立于Fraz-Keldysh和Stark效应,由于施加外部电场导致光的吸收,而且随着外部电压的改变,吸收率发生变化。吸收体对于入射光透明的,但是当外部施加电压,能带间隙变小,当光的能量超过能打间隙时吸收光子,衰减光的传输效率。当外加电压被调制后,材料的吸收率和输出光强也会被调制。因为大部分能量被转化为热量,因此为了确保精确的调制,需要解决热血的问题。EAM相对于EOM有更低的调制电压,因此更容 ...
低。然后是自相位调制和交叉相位调制,这部分是由高功率光折射率的变化,从而导致光学相位的改变。三、COTDR性能参数通常将信号功率与探测器输出的噪声功率之差定义为动态范围,动态范围可通过提升探测光功率来增加,但由于非线性效应存在,,探测光的功率提升有限。空间分辨率从设备角度上来说由光脉冲宽度决定,而从系统角度上而言,是和探测器噪声,相干瑞利噪声等相关的。而对付这些噪声,有各不相同的方法,比如,通过降低探测器温度降低热噪声,稳定电路控制散粒噪声,设置带通滤波降低ASE噪声,扰动偏振态用以控制偏振噪声,等等。四、COTDR的应用最近汤加火山爆发,随后较长时间内,汤加与外界“失联”,起因是火山活动使汤 ...
的倾斜和离焦相位调制来控制激发焦点的三维位置。然而,RAMP记录仅限于体外操作和麻醉动物(因为清醒动物的记录会受到大脑运动引起的记录伪影的影响)。为了缓解这个问题,部署了专用的AOD扫描模式(例如补丁扫描(patch scan)和三维超表面扫描),以获取足够的空间信息用于事后运动校正,其代价是时间分辨率。通过跟踪参考对象并实时调整 AOD 扫描仪的扫描坐标可以实现在线运动校正。技术要点:法国巴黎文理研究大学的Walther Akemann(一作)Stéphane Dieudonné和Laurent Bourdieu(两人为共同通讯)提出了一种针对三维RAMP显微镜中运动伪影问题的稳健解决方案, ...
散的。否则,相位调制将不起作用。这个过程也可以在时域中考虑。振幅调制器对在腔镜之间反射的光起到弱“快门”的作用,当它“关闭”时衰减光,当它“打开”时让它通过。 如果调制速率 f 与腔体往返时间同步,则单个光脉冲将在腔体中来回反弹。 调制的实际强度不必很大; 当“关闭”时衰减 1% 的光的调制器将实现锁模,因为光的同一部分在穿过腔体时会反复衰减。与这种振幅调制 (AM) 相关的主动锁模是频率调制 (FM) 锁模,它使用基于声光效应的调制器设备。 该设备在放置在激光腔中并由电信号驱动时,会在通过它的光中引起小的、正弦变化的频移。 如果调制频率与腔体的往返时间相匹配,那么腔体中的一些光的频率会重复上 ...
,产生偏振和相位调制,也称为波克尔斯效应。电光效应在瞬间有效发生,实现了高时间分辨率。此外,全介电电磁传感器产生的采样电场畸变可以忽略不计。利用飞秒(fs)近红外(NIR)激光脉冲与自由传播的单周期亚皮秒太赫兹辐射脉冲或瞬态电场时间同步,探测太赫兹频率电场诱导下电光晶体的折射率变化。灵敏度取决于光晶体的波克尔斯系数、在光晶体中传播的太赫兹波和近红外波的速度匹配以及它们的相互作用长度。铌酸锂(LN)是一种用于高频电场传感的通用材料,因为它具有大的电光材料系数,对可见光和近红外波(0.4-5µm)具有高透明度,对RF, mm和THz波(< 10 THz)具有低吸收。由绝缘体上的铌酸锂薄膜(L ...
EOM:精确相位调制,EOM能够实现非常精确的相位调制,适用于相干光通信和量子通信等高要求应用;超高速通信,在需要超高速数据传输的场景中,EOM是更好的选择,如数据中心互连和光纤通信。AOM:频率调谐和光束控制,AOM可以通过调节声波频率来改变出射光束的频率和波长,适用于光谱分析、激光扫描显微镜和激光雷达等应用;高效光束调制,AOM在需要精确控制光束方向和强度的实验室应用中表现出色。3.设计复杂性和成本EOM:高复杂性和成本,EOM通常需要高电压驱动,制作工艺复杂,成本较高,可能限制其在某些应用中的普及。AOM:相对简单和低成本,AOM的设计相对简单,成本较低,更适合预算有限的应用场景。4.环 ...
,它能够通过相位调制激光高效转化振幅调制,实现驱动拉曼跃迁。其证明CBG器件可以实现更大的拉比频率和改进的量子相干性。啁啾体布拉格光栅(CBG)主要特点如下:常见波长:780nm,795nm,其他波长也可定制;带宽:0.1±0.03nm;高衍射效率:>90% ;色散能力: ~400ps^2@单通,~800ps^2@双通;波长可调谐 ;尺寸: 11.25mm x 6.25mm 啁啾体布拉格光栅(CBG-795)应用示例:对于超窄带滤光片产品,除了VBG这种空间光的,我们还可以提供光纤类型的滤波器产品,带宽:1-4GHz, 波长: 795nm, 810nm,1054nm,1064nm,111 ...
或 投递简历至: hr@auniontech.com